In-Situ Fabrication, Microstructure and Mechanical Performance of Nano Iron-Rich Precipitate Reinforced Cu and Cu Alloys

Abstract

In this paper, the research progress on the strengthening of copper and copper alloy is reviewed. The research shows that traditional strengthening methods are often accompanied by the decrease of plasticity, and there are limitations in size, cost, and other aspects in the process. The in-situ nanoparticle strengthening and plasticizing technology proposed in recent years can avoid the above problems. In this paper, the idea of in-situ nanoparticle strengthening is introduced to realize the simultaneous enhancement of strength and ductility of as-cast pure copper and tin bronze alloys. The effects of in-situ precipitation of iron-rich nanoparticles on the microstructure, and mechanical properties of different copper alloy systems, are systematically elucidated based on the former characterization and mechanical testing results. The results show that the in-situ introduction of iron-rich nanoparticles in the copper systems induces the formation of a nano precipitate-fine grain (NPFG) structure, which greatly improves the strength and ductility of copper alloys. The evolution of size, distribution, number density, morphology evolution in iron-rich nanoparticles, and the formation mechanism of NPFG structure, as well as the mechanism of NPFG strengthening and toughening, are summarized. An industrial-applicable casting process is proposed to prepare bulk NPFG structured copper alloys with complex shape, high strength, and high ductility.