Abstract
As promising alternatives to liquid electrolytes, polymer electrolytes attract much research interest recently, but their widespread use is limited by the low ionic conductivity. In this study, we use electrostatic spinning to introduce particles of an ionic conductor into polyacrylonitrile (PAN) fibers to prepare a porous membrane as the host of gel polymer electrolytes (GPEs). The relevant in-situ produced GPE performs a high ionic conductivity of 6.0×10-3 S cm-1 , and a high lithium transfer number (tLi + ) of 0.85 at 30 °C, respectively. A symmetrical Li cell with this GPE can cycle stably for 550 h at a current density of 0.5 mA cm-2 . While the capacity retention of the NCM|GPE|Li cell is 79.84 % after 500 cycles at 2 C. Even with an increased cut-off voltage of 4.5 V, the 1st coulomb efficiency reaches 91.58 % with a specific discharge capacity of 213.4 mAh g-1 . This study provides a viable route for the practical application of high energy density lithium metal batteries.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
