Abstract
AbstractThis article concerns the utilization of maleated thermoplastic starch (MTPS) in the reactive extrusion melt‐blending with poly(butylene adipate‐co‐terephthalate) (PBAT) in blown film applications. First, MTPS was prepared from cornstarch with glycerol (plasticizer) and maleic anhydride (MA; esterification agent). MTPS was then melt‐blended with PBAT in a subsequent downstream extrusion operation. The effects of both polyester and MA contents were studied on the physicochemical parameters of melt‐blends. For high polyester fractions (>60 wt%), PBAT‐g‐MTPS graft copolymers were obtained through transesterification reactions. They were promoted by the MA‐derived acidic moieties grafted onto the starch backbone as shown by selective Soxhlet extraction experiments and FTIR analyses. At lower polyester content, no significant reaction occurred more likely due to an inversion in the phase morphology between both components. Tensile properties of PBAT‐g‐MTPS graft copolymer containing 70 wt% polyester were much higher as the TPS/PBAT melt‐blend modified with MA. This can be explained by a finer morphology of the dispersed phase in the continuous PBAT matrix, and an increased interfacial area for the grafting reaction as attested by morphological studies. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
