In-Situ Combustion Frontal Stability Analysis

Abstract

SummaryBecause of complex chemical reactions and multiphase flow physics, the displacement front stability for in-situ combustion (ISC) enhanced oil recovery (EOR) processes are not well understood. In this work, theory and numerical simulation validation are presented to establish an analytical frontal stability criterion for ISC processes.First, the four influencing factors for ISC displacement stability are analyzed: viscous force, heat conduction, matrix permeability changes caused by coke deposition, and gravity. A thorough analysis of the different zones and displacement fronts in a typical ISC process is conducted, and the most unstable front with the strongest tendency for gravity override is identified. Second, analytical solutions for judging the frontal stability and gravity override are established. Third, numerical reservoir simulation is performed to study the frontal stability and gravity override to validate the analytical theory. Carefully selected numerical schemes, as well as spatial and temporal discretization, are used to ensure the accuracy of these simulations.The four major zones and three displacement fronts (combustion front, leading edge of steam plateau, and oil bank leading edge) are identified in a typical 1D ISC process. The most unstable front with the largest pressure gradient contrast is the leading edge of the steam plateau. Gravity override also first takes place here with large fluid density differences across the front. By establishing material and energy balances and solving the wavy perturbation of the steam front, an analytical equation for deciding the ISC flood front stability in a 2D horizontal plane is achieved. Furthermore, the analytical solution for ISC gravity override is established. In numerical simulations, we are able to obtain results with sufficient accuracy to capture unstable ISC displacements and show fingering behavior under different conditions. The matrix permeability reduction caused by coke deposition has minimal impact on frontal stability. The simulation results are successfully validated with the analytical work for conditions in which the ISC process is stable or unstable and also for the degree of ISC gravity override. This demonstrates the predictive capability of the analytical method.In summary, a theoretical framework to analyze whether the displacement front of an ISC process is stable or not has been established. Numerical simulations confirm its predictive capability. This serves as a new reservoir engineering tool to aid the implementation and design of practical ISC projects.