Abstract
Eight-ply glass/epoxy composites interleaved by electrospun Polysulfone (PSF) nanofibers were manufactured by vacuum-assisted hand lay-up method. The effect of nanofibrous interlaminar layers on the mechanical performance of laminated composites was investigated under both in-plane quasi-static and out-of-plane low-velocity impact (LVI) test conditions. Low-velocity impact responses of reference and nanofiber interleaved composite laminates were modeled by LS-Dyna finite element (FE) code for numerical simulations. The results of the quasi-static mechanical tests show that PSF nanofiber interleaving increases the tensile and compressive strength by 10.5% and 25.5%, respectively. PSF nanofibers played an important role in improving the impact damage resistance of composite laminates with increasing impact energy levels. The low-velocity impact tests results indicated that PSF nanofibers decreased the fiber breakage area at 20 J and 30 J energy levels by about 26% and 28%, respectively. Besides, PSF nanofiber interleaving improved damage threshold load values by 4.8%, 15.2%, and 23% at 10 J, 20 J, and 30 J energy levels, respectively. Experimental and FE simulation results were comparatively presented in terms of force–time, force–deflection, and energy-time curves. A good agreement was achieved between experimental and simulation results.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.