In-plane crushing response of tetra-chiral honeycombs

Abstract

Tetra-chiral (TC) honeycombs are a type of auxetic materials showing negative Poisson's ratio (NPR), which are promising for impact energy absorption. This study aims to analyze the in-plane crushing response of the TC honeycombs under both quasi-static and dynamic loading conditions through numerical simulations and theoretical analyses. The numerical modeling techniques in LS-DYNA were validated using the quasi-static crush test data of TC honeycomb specimens obtained with a 3D-printer. Numerical simulations revealed the “Z” mode deformation and the “bulge effect” under quasi-static crushing, and the row-by-row “I” mode deformation under dynamic crushing of the TC honeycombs. By referring to the simulation results, theoretical models were derived based on the representative unit for predicting the TC honeycomb's crushing strength, i.e. plateau stress, under both quasi-static and dynamic loads. Good agreement was found between the theoretical and the numerical predictions with a maximum relative error of 7%. Parametric analyses showed that the unit cell configuration has a great effect on the crushing strength of TC honeycomb under in-plane crushing. The dynamic sensitivity index was defined to quantitatively evaluate the sensitivity of the TC honeycomb's crushing strength to the loading speed, and was found to depend on the unit cell geometry. The TC honeycomb was found to present a varied effective Poisson's ratio (EPR) with strain under both quasi-static and dynamic in-plane crushing; smaller radius ratio and lower crushing speed were found to yield more obvious NPR effect. Moreover, relative dimension of the TC honeycomb represented by the orthogonal array ratio do not affect its plateau stress under either quasi-static or dynamic crushing, while large orthogonal array ratio results in more obvious “bulge” and NPR effects under quasi-static crushing.