In-Plane Combination of Micropillars with Distinct Aspect Ratios to Resist Overload-Induced Adhesion Failure.

Abstract

Bioinspired micropillar adhesives have shown broad application prospects in space capture and docking, due to their strong adhesion, good environmental adaptability, and reusability. However, when performing space missions, unavoidable contact collision with target objects may cause large deformation of the micropillars, resulting in the loss of adhesion ability. This study reports a novel micropillar adhesive through the in-plane combination of micropillars (IPCM) with different aspect ratios, consisting of small pillars for retaining strong adhesion and large ones for resisting overload-induced adhesion failure. It is demonstrated that the IPCM array can still maintain 85% of the adhesion peak after static large deformation compared to a general micropillar array composed of the same pillars. The impact of element size and layout of the IPCM, as well as detachment velocity on adhesion performance under high preload is discussed. Furthermore, finite element contact analysis qualitatively reproduces the experimentally observed micropillar deformations and attributes the overload-induced adhesion failure to the redistribution of surface normal stress. Finally, the potential application of the IPCM in dynamic capture is demonstrated on different objects. The proposed IPCM opens up new design concepts for practical applications of bioinspired adhesives in space capture and docking.