In-line mode-dependent loss equalizer with femtosecond laser induced refractive index modification.

Abstract

We demonstrate an in-line all-fiber mode-dependent loss (MDL) equalizer with femtosecond laser induced refractive index (RI) modification. By inscribing an RI-modified structure into the core of a few-mode fiber (FMF), a differential mode attenuation (DMA) can be achieved for LP01 and LP11 modes. The DMA can serve as an in-line MDL equalizer for the long-haul mode-division multiplexing transmission system. Through numerical simulations, we identify that the LP01 mode has a larger attenuation than that of higher-order modes, where the sign of DMA is contrary to that of the conventional FMF links and devices. Finally, a proof-of-concept experiment is implemented by inscribing an RI modified region with a width of 4 µm, a height of 13 µm, and a length of 200 µm into the FMF core. An average additional attenuation of 8.4 dB and 3 dB can be applied to the LP01 and LP11 modes over the C-band, respectively, leading to an MDL equalization range of 5.4 dB. Meanwhile, the average polarization dependent loss (PDL) of the LP01 and LP11 modes induced by the in-line MDL equalizer is approximately 0.3 dB over the C-band. Power matrix measurement indicates that the in-line MDL equalizer has a negligible mode coupling. The proposed in-line MDL equalizer with a wider range and low insertion loss is feasible by precise manipulation of femtosecond laser inscription.