Abstract
The complex industrial production process of amino acids (AAs) leads to the existence of a certain amount of impurities in Compound Amino Acid Injection (6AA). It is difficult to obtain its comprehensive and systematic impurity profile using conventional ultraviolet (UV) detectors due to lack of a suitable chromophore in the structures of AAs and their impurities. In our study, a universal ion-pair high performance liquid chromatography (HPLC) method combined with high resolution mass spectrometer (HRMS) and charged aerosol detection (CAD) was developed to identify and determine the content of impurities in Compound Amino Acid Injection (6AA), respectively. After optimizing the content of trifluoroacetic acid (TFA) and heptafluorobutyric acid (HFBA) in the mobile phase on a C18 AQ column, HPLC-CAD method was developed and nine unknown impurities were detected. These impurities were successfully identified using HPLC coupled with orbitrap mass spectrometry and confirmed with their reference substances. The CAD parameters setting was optimized to improve the sensitivity and linearity of the methods before the developed method was validated. The results of validation reflected that the limit of detection (LOD) was approximately 2 ng (corresponding to approximately 0.02 % of L-isoleucine in injection). Under the optimized power function value (PFV) of CAD, the linear range of each impurity was 1 ∼ 200 μg mL−1 (the linear range of one of the impurities with higher content was 2 ∼ 400 μg mL−1) with coefficients of determination (R2) greater than 0.998. The recovery rates for nine impurities were 93.37 % ∼ 110.23 %. This study made full use of the qualitative functions of HRMS and the versatility of CAD, revealing possible impurities in the 6AA injection, which could provide reference for the safety research of it.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
