Abstract
It is still difficult to simultaneously achieve surface polishing and purity-free modification of 30CrMo steel by conventional treatment technologies. Herein, the continuous circular scanning electron beam process (CCSEBP), a novel route, for direct surface modification of 30CrMo steel is proposed. The changes regularity in microstructure, surface roughness, microhardness and wear resistance after electron beam treatment was investigated. Results indicated that the modified layer was primarily composed of typical acicular and lath martensite. After polishing, the surface roughness was decreased from 2.2 μm to 0.9 μm and microhardness improved significantly, which is closely associated with martensitic transformation. Moreover, the wear amount of the 30CrMo steel after modification is reduced by 50% compared to the pristine specimen. Following appropriate treatment, 30CrMo steel exhibited an extraordinary combination of hardness and finish. This study shed light on the development of high-efficiency modification for electron beam scanning 30CrMo steel.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
