Improving Vibration Monitoring of Structures Using Theodolites with Built-In Image Sensors

Abstract

The purpose of this paper is to investigate the capabilities of the inexpensive theodolite created by the authors, compared with modern commercial instruments, equipped with a Leica TPS1203 robotic total station with built-in GoPro Hero6 camera image sensors. This theodolite was tested in the laboratory where simulated dynamic displacements were determined. The results of the experimental tests showed that the displacement errors and differences between the simulated displacements of the test machine and those detected by the theodolite were in the range of [Formula: see text][Formula: see text]mm to +0.13[Formula: see text]mm depending on the simulated amplitude. The theodolite was further used in the field for static and dynamic tests of the Wanzhou Railway Bridge, China. Determination of the dynamic motions of the bridge and the results of calculating the natural frequencies from the measurement data are presented. During loading tests of the bridge, the frequencies were also determined by accelerometers and these data were used as a reference to assess the accuracy of the theodolite and its suitability for dynamic tests. An original algorithm was developed in the MATLAB software environment to process the recorded videos, i.e. image processing to determine displacements and natural frequencies. It is demonstrated that the position of the theodolite at a distance of 28.5[Formula: see text]m from the bridge provides the correspondence of one pixel of 0.333[Formula: see text]mm, which provides a high level of accuracy when determining the dynamic vertical displacements of a moving target. It is established that the proposed theodolite will cost less than 5 000 euros. The results obtained are relevant for use in civil engineering for monitoring the amplitude vibrations of structures.