Abstract
A promising duplex coating was prepared by microarc oxidation (MAO) and enameling processes onto polished Ti6Al4V alloy. The TiO2 ceramic coating deposited by MAO was characterized and then combined with an enameling treatment in order to improve the tribological and corrosion resistance of Ti6Al4V alloy. The morphology, phase composition, and hardness of MAO and MAO/enameling-coated Ti6Al4V alloy were evaluated by scanning electron microscopy (SEM), X-ray diffraction (XRD), and Vickers microhardness tester, respectively. The tribological performance was investigated using a ball-on-disk tribometer. The corrosion resistance was studied using immersion tests and potentiodynamic polarization. Wear tests show that the enamel coating on the MAO-coated surface causes a reduction in the friction coefficient. Immersion tests demonstrate that the duplex coating is more effective in improving the corrosion resistance of Ti6Al4V than the MAO coating especially at high temperature (80 °C). Potentiodynamic polarization curves reveal that the corrosion potential of the duplex coating increases by about 250 mV and the corrosion current density is slightly lower than that of the MAO coating. The duplex coating is superior to the stand-alone MAO coating in improving the tribological and corrosion behavior of Ti6Al4V.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
