Abstract
SummaryFlame‐retarded sorbitol‐based bioepoxy resins cured with cycloaliphatic amine hardener and containing different commercially available additive‐type flame retardants (FRs) have been prepared. Three different oxidation states of phosphorus, aluminium diethyl phosphinate (AlPi) (+1), phosphonate polyol (+3), ethyl ethylene glycol phosphate and ammonium polyphosphate (APP) (+5), have been studied. The effect of using melamine cyanurate with APP and AlPi has been assessed. The self‐extinguishing V‐0 rating according to UL‐94 flammability standard tests and very good limiting oxygen index for combustion are displayed for most flame‐retarded samples at 3 wt% phosphorus content. The flame retardancy effect for the additives was confirmed using cone calorimetry. The samples containing MC with APP at 3%P content showed a dramatic reduction of the total heat release by 60% and reduction of the peak of heat release rate by 70% compared to the reference epoxy matrix. The addition of these FRs together did not decrease the glass transition temperature significantly.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.