Improving the Solution Accuracy of the Volume-Surface Integral Equation for the Open PEC Structures Embedded Within Dielectrics

Abstract

In the solution of volume-surface integral equation (VSIE) for open perfect electric conductor (PEC) structures embedded within dielectric substrates, how to explicitly enforce the continuity condition (CC) of electric flux on the PEC–dielectric interfaces to improve the numerical accuracy is investigated. In the traditional VSIE formed by combining the surface electric field integral equation (EFIE) and volume integral equation (VIE), the fictitious surface charge, which does not exist physically, is accumulated on the PEC–dielectric interfaces. This will lead to the inaccuracy of numerical results, which can be eliminated by the CC. To correctly enforce the CC, the equivalent surface current distribution on both sides of open PEC should be distinguished. For this purpose, the combined field integral equation (CFIE) consisting of electric field and magnetic field integral equations is used to model the open PEC part. In the proposed approach, the number of surface unknowns needs to be doubled, which can be balanced by reducing the volumetric unknowns through the enforcement of CC. Furthermore, by fully considering the numerical symmetry between both sides of open PEC surface, the filling process of the matrix as well as the excitation vector in implementing the method of moments (MoMs) can be simplified. Numerical experiment demonstrates that the enforcement of CC can improve the VSIE accuracy obviously. For example, when calculating the frequency response of frequency selective surfaces (FSSs), the results obtained from the traditional VSIE often shift to higher frequencies, while the proposed approach gives reasonably good results.