Abstract
Lead-free 0.945K0.48Na0.52Nb0.96Ta0.04O3-0.055BaZrO3 + 6%MnO + xZrO2 piezoelectric ceramics sintered in a reducing atmosphere were prepared by conventional solid-state reaction methods. The use of the ZrO2 dopant resulted in an increase in the rhombohedral (R) phase in orthorhombic (O)/R coexisting phases. Nonstoichiometric ZrO2 dopant addition could effectively improve the anti-reduction properties of KNN-based ceramics via controlling the oxygen vacancy concentration. In particular, 2% mol nonstoichometric ZrO2 dopant addition could improve the activation energy of the grain boundary (Egb) via increasing the grain boundary thickness. The addition of the ZrO2 dopant could improve the fatigue resistance of the unipolar piezoelectric strain of 0.945K0.48Na0.52Nb0.96Ta0.04O3-0.055BaZrO3 + 6%MnO ceramics. The optimum inverse piezoelectric coefficient of ceramics at x = 0.01 reached up to ∼465 pm V-1 at a low driving electric field E of 20 kV cm-1 at room temperature, and the temperature stability of reached 155 °C. After 106 unipolar fatigue cycles, the β value of 0.945KNNT-0.055BZ + 6Mn + xZr ceramics could be preserved to more than 86%. The 0.945K0.48Na0.52Nb0.96Ta0.04O3-0.055BaZrO3 + 6%MnO + xZrO2 ceramic is a lead-free material with great potential to be applied in the fabrication of multilayer ceramic actuators with Ni inner electrodes in the future.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.