Improving the hydrogenation properties of AZ31-Mg alloys with different carbonaceous additives by high energy ball milling (HEBM) and equal channel angular pressing (ECAP)

Abstract

In this study, the hydrogen storage performance of commercial AZ31-Mg alloys combined with various allotropes of carbon was investigated and the microstructural modifications with respect to plastic deformation and high energy milling techniques investigated, with the aim of obtaining enhanced hydrogen storage efficiency. The hydrogen storage performance of alloys prepared with different weight ratios of carbonaceous materials as a catalyst was monitored in order to explore the effective improvement in hydrogen storage performance through microstructural modification. Additionally, the effects of different processing methods such as equal channel angular pressing (ECAP) and high energy ball milling (HEBM) were also observed. AZ31 Mg based composites with various carbon additives were produced through gravity resistance casting and their micrographic structures examined through optical Microscopy (OM), X-ray diffraction (XRD) and scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS). The average particle size distributions of the sample powders were also measured. The rate of hydrogenation kinetics was calculated by a Sievert's type apparatus. Significant enhancement of the hydrogenation performance was obtained with the addition of carbonaceous materials. Overall, the hydrogen storage performance after ECAP deformation of the AZ31-3CB (carbon Black) composite showed a gain in the maximum capacity of 6.72 ± 0.05 wt%. Similar, after milling of the AZ31-3G (Graphene) composite materials, a maximum potential capacity of 6.83 ± 0.04 wt% was attained within 792 ± 144.34 s, with desorption of the entire H2 content in 143.2 ± 26.09 s. The obtained results revealed significant improvement in the hydrogen storage capacity of AZ31-Mg alloys with the addition of carbon materials and with respect to plastic deformation and milling techniques.