Improving the efficiency and reliability of electric power generation at incineration plants

Abstract

The article deals with the problem of waste disposal and, accordingly, landfills in the Moscow Region, which have now become the number 1 problem for the environment in Moscow and the Moscow Region. To solve this problem, incineration plants (IP) will be established in the near future. 4 plants will be located in the Moscow Region that will be able to eliminate 2800 thousand tons of waste per year. Burning of waste results in formation of slag making 25% of its volume, which has a very high temperature (1300.1500°C). An arrangement is considered, in which slag is sent to a water bath and heats the water to 50.90°C. This temperature is sufficient to evaporate any low-temperature substance (freons, limiting hydrocarbons, etc.), whereupon the steam of the low-temperature working medium is sent to a turbine, which produces additional electricity. The creation of a low-temperature thermal power plant (TPP) increases the reliability of electricity generation at the IP. The operation of low-temperature TPPs due to the heat of slag is very efficient, their efficiency factor being as high as 40.60%. In addition to the efficiency of TPPs, capital costs for the creation of additional devices at the IP are of great importance. Thermal power plants operating on slag are just such additional devices, so it is necessary to minimize the capital costs of their creation. In addition to equipment for the operation of TPPs, it is necessary to have a working medium in an amount determined by calculations. From the wide variety of working media, which are considered in the article, it is necessary to choose the substance with the lowest cost.