Abstract

Biomass pyrolysis is a promising technology for fuel and chemical production from an abundant renewable source. It takes place usually in two stages; non-catalytic pyrolysis with further catalytic upgrading of the formed pyrolysis oil. The direct catalytic pyrolysis of biomass reduces the pyrolysis temperature, increase the yield to target products and improves their quality. However, in such one-stage process the contact between biomass and solid catalyst particles is poor leading to an excessively high degree of pure thermal pyrolysis reactions. The aim of this study was to enhance the catalyst-biomass contact via co-pressing of biomass and catalyst particles as a pre-treatment method. Catalytic pyrolysis of biomass components with HY and USY zeolites was studied using thermogravimetric analysis (TGA), as well as experiments in a pyrolysis reactor. The liquid and coke yields were characterized using gas chromatography, and TGA respectively. The TGA results showed that the degradation of the co-pressed cellulose occurred at lower temperatures compared to the pure thermal degradation, as well as catalytic degradation of non-pretreated cellulose. All biomass components produced better results using the co-pressing method, where the liquid yields increased while coke/char yields decreased. Bio-oil from catalytic pyrolysis of cellulose with HY catalyst mainly produced heavier fractions, while in the presence of USY catalyst medium fraction was mainly produced within the gasoline range. For hemicellulose catalytic pyrolysis, the catalysts had similar effects in enhancing the lighter fraction, but specifically, HY showed higher selectivity to middle fraction while USY has produced higher percentage of lighter fraction. Using with both catalysts, co-pressing had the best effect of eliminating the heavier fraction and improving the gasoline range fraction. Spent catalyst from co-pressed sample had lower concentrations of coke/char components due to the shorter residence times of volatiles, which suppresses the occurrence of secondary reactions leading to coke/char formations.

Highlights

  • Biomass feedstock has received consistent attention due to their vast potential as sustainable materials to replace fossil fuels in energy applications and petrochemical production [1,2,3,4,5]

  • Biomass is composed of cellulose (40–60%), hemicellulose (20–40%), and lignin (20–35%)

  • Hemicellulose is a complex polymer mainly composed of pentoses and hexoses [1,4,5,9,10,11,12] that are highly substituted with acetic acid [2]

Read more

Summary

Introduction

Biomass feedstock has received consistent attention due to their vast potential as sustainable materials to replace fossil fuels in energy applications and petrochemical production [1,2,3,4,5]. Biomass is composed of cellulose (40–60%), hemicellulose (20–40%), and lignin (20–35%). It contains small amounts of pectin, protein, extractives, and ash [1,6,7,8,9]. Cellulose is a glucose polymer linked by a β-1-4-glycosidic bond [1,4,5,9]. Its structure is regular with higher crystallinity without any branched chains [10,11,12]. The third major constituent, is a cross-linked phenolic polymer comprised of three constituent monomers (p-hydroxyphenyl, guaiacyl, and syringyl) with no regular repeating structure [1,3,4,9,11]. Lignin is relatively hydrophobic [8] and aromatic in nature [2,10] with several hydroxyl and methoxy branched chains [2,7,11,13,14]

Objectives
Methods
Results
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call