Improving the Bioactivity and Antibiofilm Properties of Metallic Implant Materials via Controlled Surface Microdeformation.

Abstract

Although metallic implants provide most of the required properties for bone-related applications, especially orthopedic implants, insufficient osseointegration, which may lead to loosening of the implant or prolonged healing time, is still an issue to be resolved. Osseointegration can be improved via application of various surface treatments on the metal surface. The current study focuses on a novel surface microdeformation method, which enables the formation of controlled surface patterns of various parameters. With this purpose, a surface microdeformation procedure was applied on 316L stainless steel surfaces, forming four different patterns which affected various surface parameters such as roughness, surface energy, dislocation activities close to the surface, and wettability. Static immersion tests in a simulated body fluid (SBF) environment showed that modifying the surface parameters via controlled surface patterning promoted the formation of a stable oxide layer and calcium-phosphate (CaP) deposition on the metal surfaces, improving bioactivity. Moreover, the higher amount of CaP deposition and oxide layer formation on the modified surfaces led to reduced ion release, which contributed to improved corrosion resistance. Finally, the effect of the formed surface patterns on antibiofilm formation was investigated via incubation with C. albicans for 24 h, which exhibited that microdeformation patterns remarkably inhibited the biofilm formation. Throughout the experiments, certain patterns yielded outstanding results among the four patterns formed. Overall, it was concluded that forming controlled patterns on stainless steel surfaces via surface microdeformation significantly contributed to the metal's biocompatibility via improving bioactivity, corrosion resistance, and antibiofilm formation properties. Especially, the specific surface properties such as increased surface energy, high surface roughness, and dislocation density close to the metal surface as well as increased hydrophilicity obtained via forming the pattern with relatively deeper and narrowly spaced indents yielded the most promising outcomes. These methodologies constitute novel approaches to be used while designing new methodologies for the surface modification of metallic implant materials for improved osseointegration.