Abstract
Temperature resolution is a key factor for the performance of a Distributed Temperature Sensor (DTS). One can define the resolution as the degree of uncertainty in the temperature information. Thus, the temperature measured in a steady-state condition at a given point in the fiber will vary between successive measurements and between adjacent points that are at the same temperature. Temperature resolution of the system becomes worse as return signal level decreases, as in the case of measurements in longer fibers or as a result of increased loss due to bends or connectors. Besides, recent studies show temperature resolution becomes worse for high measurement temperatures. In this context, this paper discusses the use of an Artificial Neural Network (ANN) algorithm to improve the temperature resolution in a DTS by correctly reconstructing hot regions in the fiber without new extra information of the system, such as: impulsive response, attenuation of the signal of interest, local losses due to fiber curvatures and connectors. Therefore, the use of ANN has a strong application in the calibration of DTS systems.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.