Abstract
AbstractThis article addresses design modification to a flat‐blade static mixer to enhance mixing performance. The static mixer elements used in this work consist of four blades with curvature made to intensify turbulent‐like flow, while reducing the pressure drop. The blades were mounted on a cylindrical housing with 45° rotation relative to the axial direction. The mixer assembly was used in three different arrangements of 8, 10, and 14 elements for a range of Reynolds number between 600 and 7,000. The coefficient of variance (COV) of samples was used to measure the mixing quality. The curved‐blade mixer provides considerable improvement in mixing quality compared with the flat‐blade mixer and comparable to the SMX mixer. Compared with the flat‐blade static mixer, the new design reduces the COV by up to about 50%. This effect is more pronounced when the number of mixing elements increases. Furthermore, the friction factors for the modified mixer, obtained at a wide range of Reynolds number, were apparently smaller than those for the flat‐blade, SMX, and SMV mixers. The correlation presented for the friction factor, when all mixer arrangements and aspect ratios were considered, supports the experimental data with ±15% deviation.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
