Improving high-voltage cycling and stabilizing the electrode-electrolyte interface of nickel-rich layered cathodes by magnesium doping

Abstract

Next-generation lithium-ion batteries will rely on nickel-rich layered oxides as cathode materials, but these materials are associated with structural and voltage losses. Magnesium (Mg) doping helps improve the performance of the nickel-rich layered cathode material. The Mg-modified LiNi0·90Mn0·05Co0·05O2 (NMC-90) has been successfully synthesized through a co-precipitation technique followed by calcination at 850 °C. Modified NMC-90 exhibits better-organized layers and improved interfacial properties than pristine ones based on structural, chemical, and morphological studies. In a voltage range of 2.8–4.5 V, Mg (0.01 mol%)-doped NMC-90 (NMC-M1) composite cathode shows an excellent discharge capacity of 211.11 mAh/g, whereas pristine NMC-90 (NMC-M0) attains only 210.59 mAh/g at 0.1C with an initial coulombic efficiency of 89.5 % for NMC-M1 and 87.5 % for NMC-M0 cathode. The NMC-M1 cathode demonstrated an impressive enhancement in cyclability after 60 cycles compared to the NMC-M0 at 1C rate, in which the NMC-M1 cathode attains a high capacity retention of 80 % while the NMC-M0 cathode shows only 37 %. This study illustrates the importance of studying the effects of elemental doping on cell performance. It will drive the future development of cathode materials with high Ni and low Co content.