Abstract

During the late stage of gas field development, the solution of specific issues is required to increase the flow rates of wells and reduce their water cut. The accumulated experience in the development of gas and gas condensate fields indicates that the most effective way to remove water accumulating in wells is to introduce foaming compositions based on surfactants to the bottom of the wells. The most technologically advanced application was the use of solid and liquid surfactants. The installation of smaller diameter tubing in the wells ensured the removal of fluid from the bottom of the well, but after several months of operation the conditions for removing the liquid from the bottom of the well deteriorate. Technologies for using concentric elevator systems and plunger elevators are used on a single number of wells. The main technology for removal of liquid from the bottom of gas wells is currently the technology for processing bottom holes with solid surfactants.

Highlights

  • Введение Период падающей добычи газа на газовых месторождениях характеризуется истощением пластовой энергии, что приводит к снижению скоростей движения флюидов и газа в насосно-компрессорных трубах (НКТ) и не обеспечивает вынос скопившейся на забоях скважин жидкости

  • The accumulated experience in the development of gas and gas condensate fields indicates that the most effective way to remove water accumulating in wells is to introduce foaming compositions based on surfactants to the bottom of the wells

  • The installation of smaller diameter tubing in the wells ensured the removal of fluid from the bottom of the well, but after several months of operation the conditions for removing the liquid from the bottom of the well deteriorate

Read more

Summary

Introduction

Введение Период падающей добычи газа на газовых месторождениях характеризуется истощением пластовой энергии, что приводит к снижению скоростей движения флюидов и газа в насосно-компрессорных трубах (НКТ) и не обеспечивает вынос скопившейся на забоях скважин жидкости. Основными геолого-техническими мероприятиями (ГТМ) для поддержки работы самозадавливающихся газовых скважин на месторождениях являются проведение водоизоляционных работ, продувка ствола скважин с выпуском газа в атмосферу, использование технологий плунжерного и концентрического лифтов, циклическая закачка сухого газа в затрубное пространство, ввод на забои скважин жидких и твердых поверхностно-активных веществ (ПАВ). Наиболее доступной и эффективной технологией для удаления жидкости с забоя газовых скважин является ввод на забой скважины ПАВ, приводящих к вспениванию жидкости или газожидкостной смеси в стволе скважины и ее выносу на дневную поверхность [2].

Results
Conclusion
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.