Improving Cochlear Implant Performance in the Wind Through Spectral Masking Release: A Multi-microphone and Multichannel Strategy.

Abstract

Adopting the omnidirectional microphone (OMNI) mode and reducing low-frequency gain are the two most commonly used wind noise reduction strategies in hearing devices. The objective of this study was to compare the effectiveness of these two strategies on cochlear implant users' speech-understanding abilities and perceived sound quality in wind noise. We also examined the effectiveness of a new strategy that adopts the microphone mode with lower wind noise level in each frequency channel. A behind-the-ear digital hearing aid with multiple microphone modes was used to record testing materials for cochlear implant participants. It was adjusted to have linear amplification, flat frequency response when worn on a Knowles Electronic Manikin for Acoustic Research to remove the head-related transfer function of the manikin and to mimic typical microphone characteristics of hearing devices. Recordings of wind noise samples and hearing-in-noise test sentences were made when the hearing aid was programmed to four microphone modes, namely (1) OMNI; (2) adaptive directional microphone (ADM); (3) ADM with low-frequency roll-off; and (4) a combination of omnidirectional and directional microphone (COMBO). Wind noise samples were recorded in an acoustically treated wind tunnel from 0° to 360° in 10° increment at a wind velocity of 4.5, 9.0, and 13.5 m/s when the hearing aid was worn on the manikin. Two wind noise samples recorded at 90° and 300° head angles at the wind velocity of 9.0 m/s were chosen to take advantage of the spectral masking release effects of COMBO. The samples were then mixed with the sentences recorded using identical settings. Cochlear implant participants listened to the speech-in-wind testing materials and they repeated the sentences and compared overall sound quality preferences of different microphone modes using a paired-comparison categorical rating paradigm. The participants also rated their preferences of wind-only samples. COMBO yielded the highest speech recognition scores among the four microphone modes, and it was also preferred the most often, likely due to the reduction of spectral masking. The speech recognition scores generated using ADM with low-frequency roll-off were either equal to or lower than those obtained using ADM because gain reduction decreased not only the level of wind noise but also the low-frequency energy of speech. OMNI consistently yielded speech recognition scores lower than COMBO, and it was often rated as less preferable than other microphone modes, suggesting the conventional strategy to switch to the omnidirectional mode in the wind was undesirable. Neither adopting an OMNI nor reducing low-frequency gain generated higher speech recognition scores or higher sound quality ratings than COMBO. Adopting the microphone with lower wind noise level in different frequency channels can provide spectral masking release, and it is a more effective wind noise reduction strategy. The natural 6 dB/octave low-frequency roll-off of first-order directional microphones should be compensated when speech is present. Signal detection and decision rules for wind noise reduction applications are discussed in hearing devices with and without binaural transmission capability.