Improving coating properties of shellac–epoxidised-novolac blends with melamine formaldehyde resin

Abstract

PurposeThe purpose of this study is to improve the coating properties of shellac–epoxidised novolac blends by treatment with melamine formaldehyde resin (MF) at ambient temperature for its use as a coating material.Design/methodology/approachEpoxidised-novolac resin was synthesised by epoxidation of novolac resin with epichlorohydrin. Novolac resin was synthesised by reaction of phenol with formaldehyde in acidic medium. Shellac was blended with the epoxidised-novolac resin in solution in varying ratios and treated the blends with MF resin in fixed ratio. Coating properties of the treated compositions were studied using a standard procedure. The compositions were characterised with Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA) and scanning electron microscopic (SEM) spectroscopy.FindingsTreatment of shellac–epoxidised-novolac blends with MF resin improved water and alkali resistance of the blends, besides enhancing gloss. Gloss in all the blends was uniformly increased on treatment with MF resin. Water resistance of the blends tremendously improved after treatment with MF resin. Contact angle of the blends against water increased while decreased against ethylene glycol and dioxane. The compositions were more resistant to polar solvent than non-polar ones, suggesting that the compositions shifted to hydrophobic (lipophilic) nature on treatment with the MF resin.Research limitations/implicationsA specified concentration of MF resin was used in the study. Different concentrations of the MF resin can also be tried for treatment of shellac–epoxidised-novolac blends to see the effect of the resin on the blends.Practical implicationsTreatment of shellac–epoxidised-novolac blend with MF resin improved the coating properties of the blends. The formulation SeNB-64 is the best with high gloss, good impact, scratch hardness and water resistance, and hence can be used as coating material for metal surfaces.Originality/valueBlending of shellac with epoxidised-novolac resin and treatment of the blends with the MF resin was done for the first time. The formulation SeNB-64 can be used as coating material for metal surfaces.