Improving burning speed by using hydrogen enrichment and turbulent jet ignition system in a rotary engine

Abstract

Low flame speed restrains engine efficiency and increases HC emissions in rotary engines. Hydrogen addition and turbulent jet ignition have a great potential in increasing engine performance as they increase fuel burning speed. In this study, the classical R13b-Renesis Wankel engine and a modified one with a turbulent jet ignition configuration are numerically investigated by using hydrogen as a supplement. Eccentric motion of the rotor was generated by using User Defined Function in ANSYS-Fluent software. Pure methane and methane blended with 3% and 6% hydrogen energy fractions were used as fuels in the calculations. Combustion was modeled by using reduced mechanism of hydrogen-methane combustion having 22 species and 104 reactions. The Wankel engine was simulated at 2000 rpm speed and partial load conditions. At first, classical engine configuration having two spark plugs was simulated with pure methane. Then, hydrogen blended methane simulations were conducted to investigate the benefits of the hydrogen addition. Similar procedure was applied for the turbulent jet ignition application. The results show that both approaches are effective on increasing the burning speed of the fuel. It is revealed that hydrogen addition increases the indicated mean effective pressure (IMEP) by 1.8% and 5.2% for 3% and 6% hydrogen fraction cases respectively in the classical engine. Turbulent jet ignition with pure methane increases IMEP by 4.7% compared to the classical engine. Hydrogen addition only in pre-chamber is effective as much as 6% hydrogen fraction of classical engine. As the burning speed is increased by the application of these methods, CO and HC emissions are reduced and NO emission is increased. It is concluded that benefits of hydrogen addition and turbulent jet ignition applications can be optimized for both reducing harmful emissions and increasing engine performance.