Abstract
Advances in energy efficient electronic components create new opportunities for wireless acoustic sensor networks. Such sensors can be deployed to localize unwanted and unexpected sound events in surveillance applications, home assisted living, etc. This research focused on a wireless acoustic sensor network with low-profile low-power linear MEMS microphone arrays, enabling the retrieval of angular information of sound events. The angular information was wirelessly transmitted to a central server, which estimated the location of the sound event. Common angle-of-arrival localization approaches use triangulation, however this article presents a way of using angular probability density functions combined with a matching algorithm to localize sound events. First, two computationally efficient delay-based angle-of-arrival calculation methods were investigated. The matching algorithm is described and compared to a common triangulation approach. The two localization algorithms were experimentally evaluated in a m by m room, localizing white noise and vocal sounds. The results demonstrate the superior accuracy of the proposed matching algorithm over a common triangulation approach. When localizing a white noise source, an accuracy improvement of up to 114% was achieved.
Highlights
Developments in energy efficient electronic components have led to low-cost solutions that create opportunities for commercial, battery-powered Wireless Sensor Networks (WSNs) [1]
Because this value strongly depends on the dimensions of the test environment, the results were normalized by dividing the error value by the room diagonal, resulting in a normalized localization error êloc ≤ 1
The sensor nodes contained a microphone array with two elements spaced 10 cm apart
Summary
Developments in energy efficient electronic components have led to low-cost solutions that create opportunities for commercial, battery-powered Wireless Sensor Networks (WSNs) [1]. TDoA based systems consist of fixed distributed sensor nodes (i.e., anchor nodes or beacons) with a single microphone, transmitting the recorded data to a central server. On this server, the data are correlated to find the TDoA, enabling the localization of the sound source with lateration techniques [6,8]. Directional based localization or Angle of Arrival (AoA) relies on the calculated angles of each sensor node to triangulate the position of the sound source. Combined with a computationally efficient method of determining the angular information, the AoA technique is most suited for use on battery powered WASN.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.