Abstract
A moisture barrier coating of Kel-F 800, developed at LLNL to reduce uranium corrosion, had to be bonded to a porous ceramic. The adhesive could not bond too strongly or react with the coating and jeopardize its barrier properties. Methods of improving adhesion to the Kel-F coating were studied. Silane and titanate coupling agents and a fluorocarbon surfactant were somewhat effective at increasing adhesion depending on the application procedure. X-ray photoelectron spectroscopy (XPS) was used to demonstrate the presence of fluorosurfactant at the fracture interface. Postcuring at elevated temperatures (85/sup 0/C) also significantly improved adhesive strength to the fluorocarbon coating. This was attributed to thermal acceleration to interfacial diffusion of the urethane adhesive into the fluoropolymer surface.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Industrial & Engineering Chemistry Product Research and Development
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.