Improvements of a Hard-Wall Closed Test-Section of a Subsonic Wind Tunnel for Aeroacoustic Testing

Abstract

For achieving accurate aeroacoustic measurements to the aircraft industry, a low-speed wind tunnel, primarily designed for aerodynamic testing, is modified to provide lower background noise environment. Based on data from single microphone at different wind tunnel locations and microphone phased-array measurements inside the test-section, the main noise sources are identified and feasible alternatives are implemented for reducing the background noise such as new acoustically treated corner-vanes and sidewall lining located upstream the drive system. The acoustically transparent concept for the test-section is also investigated showing promising results for further improvements in the wind tunnel. Results are presented for sound pressure levels from single microphone measurements at different locations in the wind tunnel as well as from the beamforming array inside the test-section. Background noise measurements before and after improvements confirm that the ability of performing aeroacoustic tests has significantly increased with noise reduction of 5 dB inside the test-section.