Abstract
An economic and facile method was urgently required for the degradation of SF6 to replace the high-energy excitation treatment. Both theoretical calculations and experimental observations were conducted to reveal the synergy of Cr/Fe/Si composites on a new technique of SF6 degradation through reacting silicon dioxide. Density functional theory (DFT) calculations show that strong adsorption of SF6 on Cr2O3, and then the fast F/O exchange between CrF3 and Fe2O3 (energy barrier was 1.45 eV) as well as FeF3 and SiO2 (energy barrier was 1.69 eV) enhanced mediated efficiency from SF6 to SiF4. The fluorine (F) migration between solid interfaces in Cr2O3&Fe2O3@SBA15 was responsible for efficient SF6 removal. The F migration route was composed of SF6 to CrF3, CrF3 to FeF3, and FeF3 to SiF4 with the lowest thermodynamic driving. Enhanced specific accumulative converted amount (SACA) of SF6 on Cr2O3&Fe2O3@SBA15 was achieved and the highest SACA was 13.98 mmol/g within 7 h, significantly higher than that on Fe2O3@SBA15 (5.74 mmol/g) and Cr2O3@SBA15 (2.71 mmol/g). Moreover, X-ray diffractometry and X-ray photoelectron spectroscopy were performed to support DFT calculations, including ion intensities detected using mass spectroscopy and composition analysis of the mediator during the reaction. Therefore, our work put forward a novel approach for economic and efficient SF6 decomposition through reacting with silicon dioxide under the mediation of Cr2O3&Fe2O3. This method was also potentially used in effective degradation of refractory non-metal halides.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have