Abstract
The objective of this work is to improve the characteristics of granular sludge by modification of the hydraulics of the bed through flow pulsation. Three UASB reactors, two operated with pulsing flow (P1 and P2) and a third without pulsation (NP), were started-up. Both recycling and feeding flow were pulsed in the reactor P1, while in reactor P2, only the feeding was pulsed. A high increase in the removal capacity and stability were achieved by applying pulsation in reactors P1 and P2 when compared to the non-pulsed one. Besides, pulsation promotes the formation of particles of smaller size and higher porosity, thus increasing the specific surface of the bed and consequently, the specific activity. In fact, while reactors P1 and P2 had a 95% COD removal when working at high organic loading rates (12 kg COD/m3 x d), reactor NP only reached 6 kg COD/m3 x d with 85% of removal capacity.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have