Improvement of the pointing accuracy of the Subaru Telescope by suppressing vibrations

Abstract

The Subaru Telescope has been operated smoothly for eight years after its first light. With the advent of instruments with high spatial resolution such as the adaptive optics, elongation of images has been noticed towards specific azimuth (AZ) and elevation (EL). With accelerometers with high time resolution, we detected vibrations of the telescope and could attribute the elongation of images to the vibrations. The detected vibrations are at 3.6 Hz and at 7-9 Hz in AZ direction and at 5-6 Hz in EL direction. Image motion due to these vibrations is 0.4 arcsec peak-to-peak at maximum, which is not negligible compared to image motion of 0.063 arcsec rms in quiescent state. The motion, which can not be canceled with the auto guider, results in elongation of images. The 3.6 Hz vibration in AZ direction is only excited while culmination EL of above 80 degrees. The 7-9 Hz vibration in AZ direction and the 5-6 Hz vibration in EL direction are excited by periodic errors in incremental encoders which are used to measure velocity of telescope rotation. We investigated possibilities to reduce the vibrations with tuning control loops of the AZ and EL axes.© (2006) COPYRIGHT SPIE--The International Society for Optical Engineering. Downloading of the abstract is permitted for personal use only.