Improvement of the Durability of Zinc-Coated Steel/Epoxy Bonded Joints

Abstract

Abstract The durability properties of bonded lap shear joints made from an epoxy/dicyandiamide adhesive and hot-dipped galvanized (G2F) or electroplated-phosphated (EZ2) steel have been investigated. The degradation mechanisms have been studied after three accelerated ageing tests: the “cataplasme humide” (“C.H.T.”), immersion (“I.T.”), and salt spray (“S.S.T.”) tests. X-ray photoelectron spectroscopy (XPS) analysis of fracture surfaces after ageing have shown that anodic dissolution of the zinc-coating is responsible for debonding in all cases and that intergranular corrosion phenomena account for poorer performances of the hot-dipped galvanized substrate during “C.H.T.” and “I.T.” Silane coupling agents were successfully used as primers on both substrates to increase the hydrolytic stability of the metal/adhesive interface. XPS results indicate that both the interfacial dissolution of the phosphate coating of EZ2 and intergranular corrosion of G2F are delayed for silane-primed specimens. The observed improvements do not appear to depend on the nature of the silane coupling agents. Alkylsilanes have been found to perform as well as silanes having a group capable of reacting with the epoxy/dicyandiamide system. Additional tests were carried out in view of the possible application of organosilane reagents as additives in corrosion-protective oils. Good durability properties have been obtained by priming the metal coupons with a standard oil/silane mixture prior to bonding. When corrosion was the controlling degradation mechanism as is the case during the salt spray test, silane treated specimens did not generally perform better than control specimens.