Abstract
In this study, improvement of the polarizer plate bubble in the thin film transistor liquid crystal display process, especially where the polarizer plate is attached to the black matrix area at the end of the glass substrate, is presented. This study proposed temperature control functions during the attaching process using the preheating operations of pressure sensitive adhesives and a pre-existing warp polarizer plate. The polarizer plate is softened evenly, and, then, the bubbles can be discharged smoothly in the attaching process. Three main control factors are used in the polarizer plate attachment process, using an experimental design method, to determine the best combination of parameters. By applying optimal parameters in the experiments, bubble width can be decreased by 60.49%, compared with that of the previous process.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
