Abstract
This study aims to measure the sheeter machine's effectiveness, efficiency, and decline factors. Also, recommendations for improvement are made to counteract the decrease in RSS production efficiency. Overall Equipment Effectiveness (OEE) and Total Equipment Efficiency (TEE) were used to measure the effectiveness and efficiency of the machine. The Failure Method Effect Analyze (FMEA) is used to investigate machine failure, while TPM provides recommendations for improvement. The results showed that the sheeter machine effectiveness value in one year was almost entirely above the international standard at 85%, except for April and May at 72.27% and 80.33%. Furthermore, the highest and lowest TEE value was in February and April with 86.29% and 58.11%, respectively. According to the Six Big Losses calculations, the causes of a decrease in the effectiveness and efficiency of the sheeter machine were breakdown, setup, and adjustment losses, and idling, and minor stoppages. The failures with the highest Risk Priority Number (RPN) based on the FMEA were rusty bearings and halted machines resulting from tucked sheets under the roller. Minimizing Six Big Losses and adopting an autonomous maintenance system were two recommendations based on the TPM concept for increasing the efficacy and efficiency of RSS manufacturing.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Industria: Jurnal Teknologi dan Manajemen Agroindustri
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
