Abstract

This study demonstrates the feasibility of improving the performance of a quantum dot (QD) intermediate band solar cell (SC) by capping an InGaAs layer on the InAs QDs and inserting GaAs spacer layers. For comparison, a GaAs reference SC of the same p-i-n structure but without InAs QDs is grown. The two devices were grown by solid source molecular beam epitaxy (SS-MBE) on epiready (001) n+-GaAs substrates and the InAs QDs structure is highly stacked and well-aligned. The two SCs were investigated by sepectroscopic ellipsometry (SE), in the photon energy range of 1–6eV, photoluminescence (PL) and photo-absorption measurements. The two major spectral features observed in the dielectric function spectra of the InAs QDs SC at ∼3eV and ∼4.5eV are attributed to the E1 and E2 critical point structures of GaAs and InAs, respectively. The PL spectrum of the InAs QDs in the GaAs matrix is higher and presents an asymmetric shape, which indicated the growth of a high-quality multistacked InAs QDs structure and the contribution of larger and relatively smaller QDs to PL spectrum. The electrical conversion at the infrared range of λ=850–1300nm for the InAs QDs SC is demonstrated by photocurrent spectra. The enhanced absorption performance (up to 1280nm) of the QDs SC was attributed to the optical absorption from InAs QDs, wetting layer and InGaAs layer of the InAs/InGaAs/GaAs QD heterostructure.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.