Abstract

The thin aluminum nitride(AlN) film using as an insulating layer was inserted between the anode (ITO) and the NPB organic film in the organic light-emitting devices(OLED) for the structure being K9/ITO/AlN/NPB/Alq3/LiF/Al.The effect of the different thickness AlN film on the device performance was investigated. After optimization, improvement of OLEDs properties is biggest when the AlN film thickness is about 0.4nm.Such a structure with AlN layer facilitates the increase of current density and decrease of threshold voltage, resulting in an improved luminance and energy efficiency. The average luminance increased by about 30% and an improvement of 21.8% on the average current density. The lifetime experiment of the devices has proved an improvement on stability because of inserted AlN film. This phenomenon is mainly because of the insulating capability of the aluminum nitride coating and the passivation role of AlN film to the ITO surface. The processing is simple and high efficient, can be widely applied to the OLED devices.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.