Abstract

AbstractDue to the increase in earthquake activity in Iraq and Middle East during the last two decades, the study and understanding of probable destructive action and the best method to mitigate this effect became more important. So, many improvements and mitigation methods can be used. In this study, the use of permeation grout technique was adopted to prevent the existing soil condition in urban area by using cement kiln dust and bentonite clay. The tests were executed by using 1 g shaking table apparatus to simulate a sinusoidal motion (vibration) at specified different frequencies. The liquefaction phenomena were observed for loose saturated sand at 60 s, 25 s, and 10 s for 0.5 Hz, 0.75 Hz, and 1 Hz, respectively. After mitigation process, the soil liquefaction did not occur until 100 s, 60 s, and 30 s, for the same mentioned frequencies. Besides, the use of cement kiln dust decreases the liquefaction potential and increase the factor of safety.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.