Improvement of Ionic Conductivity in Li7La3Zr2O12 (LLZO) Solid Electrolyte By Doping with Aluminum/Tungsten

Abstract

Recently, there has been increasing interest in solid electrolytes, which are the most important materials in all-solid-state lithium-ion batteries. Among all solid electrolytes, garnet-type Li7La3Zr2O12 (LLZO) has been proven to be one of the most promising electrolytes due to its high Li+ conductivity, wide potential window, and electrochemical stability towards metallic lithium anode. In particular, cubic garnet-type LLZO solid electrolytes have received a lot of attention for the development of high-performance all-solid-state batteries with safety, energy density, and long cycle life. In this study, we synthesized LLZO solid electrolyte powders with garnet structure and determined the optimal composition and sintering temperature by adding Al/W to form a stable cubic phase.In this study, Al or W-doped LLZO were prepared by a post-doping method. In this process, LLZO powder was first prepared, and then mixed with Al2O3 or WO3 powders to produce doped LLZO ceramic electrolytes, respectively. During this process, the doped ions entered the LLZO lattice, increasing the lithium ion transport channels and promoting lithium ion conductivity. The sintering time, crucible, and sintering temperature were adjusted to investigate the optimal process conditions of the post-doping method. As a result, the doped solid electrolyte exhibited high lithium ion conductivity and low activation energy. Using the high lithium ion conductivity and broad electrochemical stability window of the Al or W doped LLZO SSE, the (NCM622)/(Al or W doped-LLZO) cell delivered a steady cycle for 100 cycles at 0.1C. The Al or W doped-LLZO prepared in this study showed advantages of high conductivity, simple preparation process, high reproducibility, and low cost, which provides technical support and reference for further application of garnet-type SSEs in solid-state batteries with high energy density.