Abstract
Comparative investigations of the effects of steel-making practices on impact and fracture toughness were studied. From these examinations, impact and fracture toughness of the steels by vacuum carbon deoxidation (VCD) offered the required values; however, those of the steels by modified VCD and silicon-killing practices were secure. The fracture toughness ( K IC) was significantly improved by the silicon-killing and the modified VCD. These resulted from the fineness of austenitic grain size and reduction of sulphidic inclusion. It was observed that the grain size of steels by modified VCD and silicon-killing practices was 20 μm, while that of steel by VCD was 50 μm. The sulphidic inclusion contents were reduced in the steels by modified VCD and silicon-killing practices. Furthermore, the effects of cooling rates from austenitizing temperature on the impact toughness in the steel by VCD were also investigated. The impact toughness of the steel by VCD was closely related to the cooling rate. To obtain the secure impact toughness in the steel by VCD, it seems that the recommended minimum cooling rate from the austenitizing temperature should be 15°C min −1.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
