Abstract
Filter sludge (FS) is a waste material that occurs during sugar production in the sugar industry, and since it is not used anywhere, it creates a problem due to storage costs and environmental damage. In the present study, high plasticity clay was stabilized with a filter sludge which has never been used for soil stabilization in field cases. The changes in the geotechnical properties of a high plasticity clay (CH) with the additive of filter sludge (FS) were investigated. The amount of FS mixed into CH soil is 3-6-9-12-15% by dry weight of the soil. Changes in geotechnical properties such as consistency limits, compaction parameters, strength, swelling potential, CBR value of improved soils were determined. The plastic limit and optimum water content increase as the FS content added to the soil increases; liquid limit, plasticity index, and maximum dry density decrease. Improved soil strength increases as the curing time and FS amount increase, and the highest strength was obtained with 15% of FS. At the optimum additive ratio, the unconfined compressive strength increases by 33%. The swelling percentage of CH clay decreases from 42.5% to 20%. According to the wet CBR test results, the bearing capacity of the improved soil increased from %1.1 to %4.4. As a result of this study, it was seen that the FS waste material improved the geotechnical properties of the soil.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.