Abstract
A physicochemical treatment (coagulation–flocculation) was applied to a slaughterhouse wastewater, using anionic polyacrylamide as coagulant aid to improve the settling velocity of the flocs formed with the coagulants used: ferric sulphate, aluminium sulphate and polyaluminium chloride. The optimum speed and stirring time for the flocculation stage were ascertained along with the optimum pH and coagulant and coagulant aid doses. The speed and coagulation time were initially set according to recommendations in the literature concerning the treatment of this type of water. Chemical oxygen demand (COD), biochemical oxygen demand at 5 days (BOD 5) and total suspended solids (TSS) were recorded at the beginning and end of each experiment in order to monitor the process. Once the optimal conditions had been established, several parameters were measured in order to assess the coagulation–flocculation process: particle number and size, sludge volume, nutrients (ammonia nitrogen, total Kjeldahl nitrogen, albuminoid nitrogen, orthophosphate, total phosphorus) and the residual concentration of iron and aluminium in clarified water. Anionic polyacrylamide, when added with ferric sulphate or polyaluminium chloride led to a significant increase in the settling speed.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
