Abstract
Abstract Biohydrogen from microalgal biomass has shown particular advantage due to its high growth rate and high bioenergy production. As a representative of microalgae, Chlorella vulgaris was chosen as substrate along with digested sludge (DS) as inoculum in this research. In order to improve the hydrolysis of algal biomass and enhance biohydrogen production, pretreatment methods like acid and thermal pretreatment were employed. Thermal pretreatment showed better results than acid pretreatment of microalgal biomass. 100 °C for 60 min was identified as the optimum condition for the thermal pretreatment of C. vulgaris by response surface methodology (RSM) analysis. Experiments were also carried out to identify the optimum substrate to inoculum ratio (SIR) for the process. SIR of 8 generated the highest hydrogen yield of 190.90 mL H2/g-VS. Moreover, the overall energy balance of the process was evaluated and the results showed a positive energy balance of 1790.13 kJ/kg. The results indicated that optimization of pretreatment methods and substrate to inoculum ratio was effective in enhancing biohydrogen production from microalgal biomass and digested sludge.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
