Abstract
Anode-supported electrolyte composite membranes were prepared by a multilayer tape casting and co-sintering procedure. Nickel/yttria-stabilized zirconia (Ni/YSZ), nickel/scandia-stabilized zirconia (Ni/ScSZ) cermets, ScSZ, and Ce 0.9Gd 0.1O 1.9 (CGO) were used as materials of anode substrate, anode functional layer, electrolyte and interlayer. After tape casting and dryness, the green tapes were co-sintered at 1350, 1400, and 1450 °C for 4 h in air. Then the LSCF-CGO composite cathode was deposited on the CGO surface by screen-printing and sintered at 1100 °C for 3 h. The performance of the anode-supported planar single SOFC was investigated in detail. In order to measure the AC impedance spectra, the symmetrical anode-supported cell design was used and also prepared by tape casting and co-sintering techniques.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
