Improvement of a knock model for natural gas SI engines through heat transfer evaluation

Abstract

Knock is an abnormal combustion phenomena capable of causing serious damage to spark ignition engines, and is a constraint to reach the maximum potential of the engine, since strategies to increase power output and improve efficiency such as turbocharging, increased compression ratio and the advancement of spark timing, also increase the possibility of knock occurrence. Therefore, it is crucial to take into account the limits imposed by knock in the design and operating conditions of the engine when using an engine computational model. In this article a zero-dimensional two-zone engine model, coupled with a chemical kinetic model for knock detection through end-gas auto-ignition is developed and validated, for a natural gas engine. Given the importance of an accurate knock prediction, five heat transfer coefficient correlations are compared to find the most suitable to predict the knock occurrence, through calculation of a knock criterion. Correlations from Sitkei and Annand were the most suitable to predict this knock criterion for the experimental data used, and the Sitkei correlation was later tested in a parametric study to predict the effect of spark timing, compression ratio, equivalence ratio and inlet temperature in knock occurrence and intensity. Results were in accordance with real engine behaviour when knock occurs.