Improvement mechanism of water resistance and volume stability of magnesium oxychloride cement: A comparison study on the influences of various gypsum

Abstract

The development of magnesium oxychloride cement can effectively utilize the waste of potash industry and reduce its harm to the environment. Although magnesium oxychloride cement paste (MOCP) has excellent performance in dry environment, its performance is greatly deteriorated in water or humid environment, which severely limits its practical application. In order to improve the water resistance of MOCP, MOCP was modified by various gypsum in this study, and the intrinsic mechanism was explored. Results showed that replacing MgO with gypsum delayed the setting time of MOCP and effectively improved its volume stability. Although the incorporation of gypsum reduced the 14-d air-cured compressive strength of MOCP, waste gypsum was able to significantly improve the water resistance of MOCP compared to natural gypsum. When 80% flue gas desulfurization gypsum and phosphogypsum (weight of magnesium oxide) were incorporated into MOCP, the 14-d air-cured compressive strength of MOCP was only decreased by 14.49% and 15.94% compared with the control group, but its 28-d water immersion strength retention coefficient (SRC) could still reach 61.02% and 46.55%, respectively. However, for the control group and MOCP with 80% natural gypsum, the 28-d SRC were only 28.99% and 8.41%. The incorporation of high-volume waste gypsum to MOCP not only reduced the relative content of MgO, but also improved the stability of the 5-phase in water, which was beneficial to improve the water resistance of MOCP. In addition, high-volume waste gypsum-modified MOCP had lower cost and carbon emissions, and exhibited superior water resistance and sustainability compared to existing MOCP compositions.