Abstract
Improvement in noise performance and Tran conductance using positive feedback approach in bulk driven operational amplifier is proposed in this paper. Downscaling of CMOS technology has compelled the supply voltage to reduce, which in turn demands the reduction in threshold voltage. To overcome the barrier of threshold, bulk driven technique is a good nonconventional approach because it require no modification in the existing structure of MOSFET. The limitation with bulk driven approach is that the Tran conductance of operational amplifier get reduced almost three to four times. Thanks to loop of positive feedback. The resulting Tran conductance is boosted to a higher value, thus, increasing the voltage gain and decreasing the input referred noise. So, concept of positive feedback is used in the design of low voltage (LV) low Power (LP) building blocks of operational amplifier using standard CMOS technology. Though amplifier is designed for power supply of 1V, it is also capable to operate at supply of less than 1V. The simulation is carried out using Mentorgraphics tools of 180 nm technology.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.