Abstract

Improvement in Fretting Wear Properties of AISI 4135 Steel by Laser-Cladded Martensitic Stainless Steel Coatings

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Similar Papers

Paper Title
Journal
Date
Author
Development of high strength and ductile martensitic stainless steel coatings with Nb addition fabricated by laser cladding
H.M Zhu ... B.C Li
Journal of Alloys and Compounds | VOL. 832
H.M Zhu, et. al.H.M Zhu ... B.C Li
03 Apr 2020
Influence of Vanadium Microalloying on Microstructure and Property of Laser-Cladded Martensitic Stainless Steel Coating.
Hongmei Zhu ... Jipeng Hu
Materials (Basel, Switzerland) | VOL. 13
Hongmei Zhu, et. al.Hongmei Zhu ... Jipeng Hu
12 Feb 2020
Design and development of TiC-reinforced 410 martensitic stainless steel coatings fabricated by laser cladding
Hongmei Zhu ... Jipeng Hu
Ceramics International | VOL. 47
Hongmei Zhu, et. al.Hongmei Zhu ... Jipeng Hu
17 Jan 2021
Electrochemical Corrosion Characteristics of 439 Ferritic, 301 Austenitic, S32101 Duplex and 420 Martensitic Stainless Steel in Sulfuric Acid/NaCl Solution
Roland Tolulope Loto
Journal of Bio- and Tribo-Corrosion | VOL. 3
Roland Tolulope LotoRoland Tolulope Loto
10 Apr 2017
View more papers

More From: Journal of Materials Engineering and Performance

Paper Title
Journal
Date
Author
Comparison of Wear Behavior of Basic Oxygen Furnace Slag and WC-CoCr Coating
Dervis Ozkan ... Abdullah Cahit Karaoglanli
Journal of Materials Engineering and Performance | VOL. -
Dervis Ozkan, et. al.Dervis Ozkan ... Abdullah Cahit Karaoglanli
28 May 2024
A Morphological Study and Effect of Intermediate Phase Formation on Hard and Wear Resistant SiC-Co Composite Coating on Low Carbon Steel via Arc Based Heat Source
Kaushik Biswas ... Chinmaya Kumar Sahoo
Journal of Materials Engineering and Performance | VOL. -
Kaushik Biswas, et. al.Kaushik Biswas ... Chinmaya Kumar Sahoo
28 May 2024
Effect of Acid Erosion on the Tribological Performance of 304 Stainless Steel Surface Subjected to Liquid-Assisted Laser Texturing
Wenzhe Ji
Journal of Materials Engineering and Performance | VOL. -
Wenzhe JiWenzhe Ji
28 May 2024
Application of Response Surface Methodology and Machine Learning Approaches to Predict Porosity and Compression Strength of Selective Laser-Sintered Polyamide-12 Scaffold Parts
Sai Prasad Kanchi ... S Raju
Journal of Materials Engineering and Performance | VOL. -
Sai Prasad Kanchi, et. al.Sai Prasad Kanchi ... S Raju
28 May 2024
View more papers