Abstract
This investigation elucidates the traditional p-side-up InGaN/GaN multiple-quantum well (MQW) light-emitting diodes (LEDs) with different geometric patterns of microtextured indium-tin-oxide (ITO) surface using standard photolithography and wet chemical etching technique. The LEDs fabricated with the surface-textured ITO, concave and convex patterns, have the same forward voltage as the reference LED with planar-ITO, but provide higher light output power, increased by 7.9% and 16.3%, at 20 mA current injection, respectively. In addition, the external quantum efficiency (EQE) of LEDs were also enhanced from 18% (planar) to 19.4% and 21% (concave and convex patterned). The larger light output power and higher external quantum efficiency could be attributed to the microtextured ITO surface. With the textured ITO surface, especially the convex pattern, with light scattering effect at the ITO/air interface, photons could escape from the device more easily, thus increasing the light output power and external quantum efficiency of GaN-based LEDs at the same time.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
