Improvement Analysis of a Height‐Deviation Compensation‐Based Linear Interpolation Method for Multi‐Station Regional Troposphere

Abstract

AbstractIn network real‐time kinematic positioning of multi‐reference station, the spatial and temporal distribution of tropospheric delay is affected by both horizontal and elevation. The traditional modeling strategy of regional troposphere takes more consideration of the horizontal factor, and the incomplete consideration of the elevation factor will lead to the problem of reduced modeling accuracy, especially in the face of the scene with large regional height deviation. Based on the traditional linear interpolation method (LIM), a simple and effective height‐deviation compensation‐based linear interpolation method (HCLIM) for regional tropospheric is proposed. The modeling accuracy of troposphere and the positioning accuracy of user RTK in large height deviation region are significantly improved. The method was verified based on six experimental subnets with large height deviations from a provincial continuously operating GNSS reference stations network in central China. The results showed that: For GPS satellite modeling, compared with the traditional LIM method, the average modeling accuracy improvement rate of HCLIM method is (84.5%, 75.5%, 59.3%, 26.7%) in the elevation angle range of (10–30°/30–40°/40–50°/50–90°). For BDS satellite, the average modeling accuracy improvement rate of HCLIM method in the above four elevation angles is (83.3%, 70%, 50%, 23.5%). For the positioning performance of user RTK, The horizontal positioning accuracy and RTK fixing rate were similar under the two methods, while HCLIM method showed only slight improvement. However, in the U direction, LIM method showed obvious systematic bias, while HCLIM method showed consistent positioning accuracy, which was improved to 82.8% compared with LIM method.